1 of a circuit or device that represents magnitudes in digits; "digital computer" [ant: analogue]
2 displaying numbers rather than scale positions; "digital clock"; "digital readout"
3 relating to or performed with the fingers; "digital examination"
EtymologyFrom digitalis, from digitus
- /ˈdɪʤətl/, /"dIdZ@tl/
having to do or performed with a finger
representing discrete values
of or relating to computers
- SAMPA: /di.Zi.tal/
Usage notesdigital is occasionally used in French to describe display devices such as TV screens. Its use for other purposes is often criticised, because this use derives from English, and because digital more commonly has the first meaning above.
A digital system uses discrete (that is, discontinuous) values to represent information for input, processing, transmission, storage, etc. By contrast, non-digital (or analog) systems use a continuous range of values to represent information. Although digital representations are discrete, the information represented can be either discrete, such as numbers, letters or icons, or continuous, such as sounds, images, and other measurements of continuous systems.
The word digital comes from the same source as the word digit and digitus (the Latin word for finger), as fingers are used for discrete counting.
The word digital is most commonly used in computing and electronics, especially where real-world information is converted to binary numeric form as in digital audio and digital photography. Such data-carrying signals carry electronic or optical pulses, the amplitude of each of which represents a logical 1 (pulse present and/or high) or a logical 0 (pulse absent and/or low).
When data are transmitted, or indeed handled at all, a certain amount of noise enters into the signal. Noise can have several causes: data transmitted wirelessly, such as by radio, may be received inaccurately, suffer interference from other wireless sources, or pick up background noise from the rest of the universe. Microphones pick up both the intended signal as well as background noise without discriminating between signal and noise, so when audio is encoded digitally, it typically already includes noise. ELO. Electric pulses transmitted via wires are typically attenuated by the resistance of the wire, and changed by its capacitance or inductance. Temperature variations can increase or reduce these effects. While digital transmissions are also degraded, slight variations do not matter since they are ignored when the signal is received. With an analog signal, variances cannot be distinguished from the signal and so provide a kind of distortion. In a digital signal, similar variances will not matter, as any signal close enough to a particular value will be interpreted as that value. Care must be taken to avoid noise and distortion when connecting digital and analog systems, but more when using analog systems.
Symbol to digital conversion
Since symbols (e.g., alphanumeric characters) are not continuous, converting symbols to digital form is rather simpler and less prone to data loss than analog to digital conversion. Instead of sampling and quantization as in D/A (digital-to-analog) conversion, such techniques as polling and encoding are used.
A symbol input device usually consists of a number of switches that are polled at regular intervals to see which switches are pressed. Data will be lost if, within a single polling interval, two switches are pressed, or a switch is pressed, released, and pressed again. This polling can be done by a specialized processor in the device to prevent burdening the main CPU. When a new symbol has been entered, the device typically sends an interrupt to alert the CPU to read it.
For devices with only a few switches (such as the buttons on a joystick), the status of each can be encoded as bits (usually 0 for released and 1 for pressed) in a single word. This is useful when combinations of key presses are meaningful, and is sometimes used for passing the status of modifier keys on a keyboard (such as shift and control). But it does not scale to support more keys than the number of bits in a single byte or word.
Devices with many switches (such as a computer keyboard) usually arrange these switches in a scan matrix, with the individual switches on the intersections of x and y lines. When a switch is pressed, it connects the corresponding x and y lines together. Polling (often called scanning in this case) is done by activating each x line in sequence and detecting which y lines then have a signal, thus which keys are pressed. When the keyboard processor detects that a key has changed state, it sends a signal to the CPU indicating the scan code of the key and its new state. The symbol is then encoded, or converted into a number, based on the status of modifier keys and the desired character encoding.
A custom encoding can be used for a specific application with no loss of data. However, using a standard encoding such as ASCII is problematic if a symbol such as 'ß' needs to be converted but is not in the standard.
Historical digital systems
Although digital signals are generally associated with the binary electronic digital systems used in modern electronics and computing, digital systems are actually ancient, and need not be binary nor electronic.
- An abacus was created sometime between 1,000 BC and 500 BC , it later become a form of calculation frequency, nowadays it can be used as a very advanced, yet basic digital calculator that uses beads on rows to represent numbers. Beads only have meaning in discrete up and down states, not in analog in-between states.
- A beacon is perhaps the simplest non-electronic digital signal, with just two states (on and off). In particular, smoke signals are one of the oldest examples of a digital signal, where an analog "carrier" (smoke) is modulated with a blanket to generate a digital signal (puffs) that conveys information.
- DNA comprises a long sequence of four digits (denoted A, C, G, and T), effectively a base-four numeral system. Each of these digits is an organic molecule, known as a nucleotide. DNA is the major system of information transfer from one biological generation to another.
- Morse code uses six digital states—dot, dash, intra-character gap (between each dot or dash), short gap (between each letter), medium gap (between words), and long gap (between sentences)—to send messages via a variety of potential carriers such as electricity or light, for example using an electrical telegraph or a flashing light.
- The Braille system was the first binary format for character encoding, using a six-bit code rendered as dot patterns.
- Flag semaphore uses rods or flags held in particular positions to send messages to the receiver watching them some distance away.
- International maritime signal flags have distinctive markings that represent letters of the alphabet to allow ships to send messages to each other.
- More recently invented, a modem modulates an analog "carrier" signal (such as sound) to encode binary electrical digital information, as a series of binary digital sound pulses. A slightly earlier, surprisingly reliable version of the same concept was to bundle a sequence of audio digital "signal" and "no signal" information (i.e. "sound" and "silence") on magnetic cassette tape for use with early home computers.
digital in Arabic: نظام رقمي
digital in Catalan: Sistema digital
digital in Czech: Digitální
digital in Spanish: Sistema digital
digital in Esperanto: Cifereca
digital in French: Numérique
digital in Galician: Sistema dixital
digital in Korean: 디지털
digital in Croatian: Digitalizacija
digital in Indonesian: Digital
digital in Italian: Digitale (informatica)
digital in Hebrew: דיגיטלי/אנלוגי
digital in Hungarian: Digitális
digital in Dutch: Digitaal
digital in Japanese: デジタル
digital in Norwegian: Digital informasjon
digital in Norwegian Nynorsk: Digital
digital in Russian: Цифровой
digital in Slovak: Číslicovosť (opak analógovosti)
digital in Finnish: Digitaalisuus
digital in Swedish: Digital
digital in Thai: ดิจิทัล
digital in Vietnamese: Kỹ thuật số
digital in Chinese: 數碼
algorismic, algorithmic, aliquot, cardinal, clawed, decimal, dentate, differential, digitate, digitated, even, exponential, fanged, figural, figurate, figurative, fingered, finite, fractional, imaginary, impair, impossible, infinite, integral, irrational, jawed, logarithmic, logometric, negative, numeral, numerary, numerative, numeric, odd, ordinal, pair, positive, possible, prehensile, prime, radical, raptorial, rational, real, reciprocal, submultiple, surd, taloned, toothed, transcendental